![]() ![]() You need to get that working first before anything happens. If you don't see that, your 7300 is not connected to your PC. You can check this and see if it is really installed by going to the device manager of your pc, checking under ports, and looking to see if a silicon labs driver is there, assigned probably to COM 3. ![]() When you load the driver from ICOM into your PC, it enables communication between the 7300 and your PC over the USB cable, assigning one of the PC ports to it. The 7300 lets you switch to transmit mode and also modulate its transmitted signal either through the mic or the accessory port or the USB port. ![]() Thank you guys (all the guys from this group that gave lots of this information in my earlier post) and I hope this makes a complete listing of what you have to do for any new hams (like me) or anyone else that wants to get their 7300 set up for digital mode operation (receive AND send): Before all the settings are listed below, let me give a brief explanation of how this connection works, for anyone interested, especially any new hams, because it's very complicated and not completely self evident from the titles and abbreviations of all the settings.Some of you know this.I didn't! I may be missing a few things here, but this is my dissertation at this time.I hope others will add to it or correct it as needed. On a Win 10 PC 64 bit, with the latest Win 10 update. I finally got FLDIGI working completely, modulating the ICOM 7300 signal and controlling it using a single USB cable with FLRIG. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |